Revision technicians are usually the ones, who need to measure an isolation resistance, but such a device also finds its place in bigger factories and buildings, where it is convenient to to have a possibility to periodically (often) measure a status of isolation of for example transformers, motors, leads, etc.
UT513 from company UNI-Trend belongs to a category of professional devices with wide possibilities of setting, while it still remains a simplicity of use and an intuitive control. UT513 belongs to a three-member family of UT51x devices, consisting of UT511, UT512 a UT513. Devices differ from each other mainly in the max. voltage for an isolation resistance measurement (1000, 2500, 5000V) and UT512/513 also feature a USB interface for a data transfer to PC (including a CD with a software).
UT513 is able to store to its memory up to 18 measurements. Isolation resistance can be also measured with a timer (10 seconds to 15 minutes) and the built-in timer enables to measure even a polarization index by “one click”. Polarisation index is maybe more known from optics, but don´t be misleaded :-), in electronics the polarization index (PI) is a very worth value responding to a status of an insulation. PI has to be usually in arrange of 2 to 5, i.e. isolation resistance of tested device after 10 minutes (connected to a testing high DC voltage) has to be 2 to 5-times higher than at measurement after the first minute (the reason is a polarization of molecules in insulation).
Function „Compare“ enables to compare measured value of an isolation resistance with a pre-set value (user-definable) and then the display reads „GOOD“ or „NG“ as - „not good“. Maximum display (with a backlight) value is up to 9999 and here we can also see an analogue bargraph.
As we are already used to at Uni-Trend equipment, the testing leads are relatively very quality and robust, and also included are batteries and a mains adapter.
Detailed information will provide you the
UT513 user manual.
In case of interest, please contact us at info@soselectronic.com.
Videos
Advantages / Features:
- professional tester of isolation resistance and a polarization index
- up to 5000VDC testing voltage
- max display reading 9999 + bargraf
- timer for measurement control
- memory for 18 measurements
- USB interface + CD with a software
- automatic range selection
- power supply 8x C cell or an adapter (included)
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
