New DSO Oscilloscopes from HAMEG

HAMEG Instruments complements the successful HMO Series of DSO/MSO Oscilloscopes by also covering the lower bandwidth range of 70 to 200 MHz.
This is an archive article published 04/11/2011. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.

All types are MSO-ready – it suffices to connect a logic probe (option HO3508) in order to analyze 8 digital channels. With the known option HOO10 two freely selectable serial protocols of the types I2C, SPI and/or UART/RS-232 can be analyzed, hardware-supported and time-synchronous. This is possible both on the analog and the digital channels.

New is the option HOO11 which enable the analysis of these serial protocols on the analog channel. Even with the 2 channel instruments 3-wire buses such as SPI can be analyzed this way by making use of the external trigger input.(additional probe recommended)

The HOO11 will be delivered with each HMO7xx, 10xx, 15xx, 20xx at no cost in the year of introduction.

Technical parameters:

  • 2 GSa/s Real Time,
  • Low Noise Flash A/D Converter (Reference Class),
  • 2 MPts Memory, Memory zoom up to 50,000:1,
  • MSO (Mixed Signal Opt. HO3508) with 8 Logic Channels,
  • Serial Bus Trigger and Hardware accelerated Decode, I2C, SPI, UART/RS-232 (Opt. HOO10, HOO11),
  • 8 User definable Markers for easy Navigation,
  • Pass/Fail Test based on Masks,
  • Vertical Sensitivity 1 mV/div.,
  • Offset Control ±0.2...±20 V (HMO20xx, HMO15xx),
  • 12 div. x-Axis Display Range, 20 div. y-Axis Display Range (VirtualScreen),
  • Trigger Modes: Slope, Video, Pulsewidth, Logic, Delayed, Event,
  • Component Tester, 6 Digit Counter, Automeasurement, Formula Editor, Ratiocursor, FFT for Spectral Analysis,
  • Crisp 16.5 cm (6.5”) TFT VGA Display, DVI Output,
  • Lowest Noise Fan,
  • 3 x USB for Mass Storage, Printer and Remote Control optional IEEE-488 (GPIB) or Ethernet/USB,
  • Made in Germany.
New HMO models:


New DSO Oscilloscopes from HAMEG
200MHz 2 (4) Channels Digital Oscilloscopes HMO2022 (HMO2024)

150MHz 2 (4) Channels Digital Oscilloscopes HMO1522 (HMO1524)





New DSO Oscilloscopes from HAMEG
100MHz 2 (4) Channels Digital Oscilloscopes HMO1022 (HMO1024)

70MHz 2 (4) Channels Digital Oscilloscopes HMO722 (HMO724)






Accessories:


New DSO Oscilloscopes from HAMEG
HOO10 Triggering and hardware- accelerated decoding of I2C, SPI, UART/RS-232 buses on analog and/or digital channels.

HOO11 Triggering and hardware-accelerated decoding of I2C, SPI, UART/RS-232 buses on the analog channels.






New DSO Oscilloscopes from HAMEG
HO3508 8 channel logic probe for all HMO scopes









HMO724 and HMO1024: the first delivery from the end of May 2011
HMO722, HMO1022, HMO1522, HMO1524, HMO2022, HMO2024: first delivery in July 2011

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer

More about cookies
More about personal data processing

Necessary Only selected Accept all cookies