Battery-driven cellular IoT sensors with Quectel BC66 and Sensirion SHT4x

Using the example of monitoring the health of trees in plantations, Mr Kersten Heins will introduce you to a simple remote IoT solution, which is maintenance-free and enjoys long-lasting life and can be used in the agricultural and other sectors of the economy.

Monitoring of a remote location is a typical IoT application, but target use cases might differ. Sometimes, observed parameters are not changing quickly and are not critical per se, but business owners are asking for regular updates, e.g., every few hours. Let’s take the example of a “tree sensor”, an IoT solution monitoring the health status of trees. This is particularly interesting for cultivated farming areas, e.g., for a nut plantation. For this purpose, a battery-powered sensor IoT device is mounted on a reference tree where it collects some environmental data like humidity (resp. draught) which is essential information for plantation owners to optimize growth, yield, etc.

obr2798_p8631a0596e3a.jpg
Typically, these tree sensors are deployed where no power supply and no LAN is available. Therefore, for this kind of use case, an IoT device should be powered by a battery, and a cellular network will ensure that it can be used (almost) everywhere. In addition, the tree sensor should be prepared for „zero-touch“ operation during its complete product lifecycle, i.e. it should be 100% maintenance-free and should not need any battery replacement or recharge for many years. This means that our IoT sensor should be designed for maximum power efficiency. 

obr2798_p0c2d631cba8f.jpg
A tree sensor is just an example of why new low-power cellular IoT technologies like NB-IoT are inspiring the industry to create new IoT business ideas. There are many other IoT use cases like this, for the farming sector or for industrial or consumer purposes, for example: 

  • a metering device for the fill level of a silo or 
  • a liquid flow sensor reporting usage and indicating leakages in pipelines or
  • devices for various surveillance and object detection use cases or 
  • an asset tracker providing the geo-position of a valuable mobile object


These are typical “push” applications where the IoT device is inactive for most of the time, it just “wakes up” occasionally when triggered by a fixed schedule or an external event. NB-IoT is a cellular network technology (LPWAN = low power wide area network) which has been particularly specified to meet this kind of requirement, esp. if stationary IoT devices are used for infrequent transmission of small payload data packages. 

A network interface module (aka “modem”) is a key component for cellular IoT devices. Quectel is a leading manufacturer in this area. The NB-IoT module Quectel BC66 fully fulfils the requirements for this design concept for a battery-driven IoT device.

obr2798_p2253071ca9a2.jpg
Environmental sensor specialist Sensirion offers a wide range of products for a variety of parameters like humidity, temperature, volatile organic compounds (short: VOCs), NOx (Nitrogen Oxide), formaldehyde, and CO2. They all offer I2C interfaces for easy integration into IoT devices and low-power modes for battery-driven applications.

For improved protection against harsh environmental conditions, the NB-IoT antenna should be mounted inside the IoT device casing. For this purpose, 2J Antennas is offering suitable adhesive and small-sized products for an integrated solution.

Battery-driven cellular IoT sensors with Quectel BC66 and Sensirion SHT4x

Figure 1: Battery-powered NB-IoT Environmental Sensor - Block Diagram

Note: SOS electronic is a qualified supplier of products by Quectel, Sensirion and 2J antennas. To complete the low-power IoT solution, SOS electronic is also offering a broad range of Lithium batteries from Fanso, Xeno and EVE.

Minimum Power Design with NB-IoT and Quectel BC66 

To support the reduction of IoT device power consumption as much as possible, NB-IoT network technology offers an efficient feature called power saving mode (short: PSM) which allows an NB-IoT device to switch off most parts of the network interface incl. its transceiver RF section for an agreed period of inactivity

The duration of this interval is determined by network timer T3412 (aka “TAU Timer”) which is primarily used by the NB-IoT device to perform a periodic Tracking Area Update (TAU). This is a standard LTE feature to notify the availability of a user device to the connected network. Once the device has been connected successfully to the network, it remains registered during PSM intervals, but transmission activity will wait until the T3412 timer has expired.

By nature, longer PSM periods will result in less power consumption. Depending on the IoT use case, it is now up to the developer to determine the ideal time period for their device to remain in PSM mode. According to the 3GPP specification, T3412 can be programmed for PSM intervals of up to 413 days (!). 

Battery-driven cellular IoT sensors with Quectel BC66 and Sensirion SHT4x

Figure 2: Periodic Device Activity (simplified)

During agreed PSM periods all download traffic to the registered but unreachable IoT device will be buffered by the network. Our design concept for a battery-powered “push” device is based on the idea that all local IoT activities are handled during a single periodic time slot (see Figure 2), i.e.,  read sensor, receive pending messages (e.g., an operator remote control command), transmit IoT payload data.

Most of the time (approx. 99,99%), the device will remain in deep sleep mode and consumes a few µA during this time. After T3412 expires, the Quectel BC66 module will retrieve pending messages from the network, if any. During reception events, the module will consume around 30 mA, during uplink transmission it will even draw around 200 mA at 23dBm output power. Over time, the frequency and duration of these short power consumption peaks will have a significant impact on battery lifetime. It is no surprise that doubling the frequency of activity periods (e.g., from once a day to twice a day) will decrease battery lifetime by half. 

But on top of this, there are many other additional aspects which will contribute to the overall power consumption of the device. For example, positioning and impedance matching of the device antenna are critical design aspects which are significantly impacting RF performance. Antenna matching is required to maximize output power at a specific NB-IoT carrier frequency. In general, device location has an impact on power consumption and the distance to the connected cell tower should be as short as possible to maximize signal efficiency and quality. This is a critical point because the operation of battery-powered devices at coverage extension (CE) level 2 should be avoided. This NB-IoT feature is helpful to provide coverage in difficult-to-reach areas but works with repetitions and extra error correction codes which are dramatically increasing payload data overhead and transmission times. So, from a deployment point of view, it is beneficial to work with an MVNO (“virtual” network operator) allowing you to select from a choice of networks to connect to, instead of just one. See Ref. 5 for further explanation of these topics.

Quectel BC66 offers several options to support low power device design leveraging the NB-IoT PSM feature (see Ref. 2). The IoT device can initiate requesting the NB-IoT network to enter PSM state via AT command, which allows the device to enter deep sleep for the agreed PSM interval.

In deep sleep mode, the UART interface is not functional and there are only two ways to return the module to an active state:

after expiration of the internal periodic TAU timer or by an external wake-up event.


External wake-up events are indicated by toggling the PSM_EINT pin of the Quectel BC66 module. This method can be used for a predefined local event, e.g., an exceeding threshold (e.g., saying “it is too hot”) or if the presence of an object has been detected. This is another typical “push” IoT application which can be addressed by Quectel BC66 resp. in cooperation with an NB-IoT network. But for our “tree sensor” example, we use mentioned internal periodic TAU timer for wake up. 

obr2798_p88b2dd894ca0.jpg

The concept for a Battery-Powered “Push” Device

During agreed PSM periods, all device components are configured to work in their individual idle modes with extremely low power consumption.

For example, the Sensirion SHT4x humidity sensor draws 1 µA max. at 25°C (see Ref. 4). To achieve a long lifetime of the IoT device, proper orchestration of power management features of all three main components is required: Quectel BC66 network module, host MCU and sensor (see block diagram Figure 1). The master role is alternating between two of them: IoT device application is executed by the host MCU, but wake-up management is handled by the Quectel BC66 cellular module in cooperation with the NB-IoT network. This is done via the VDD_EXT output pin which is an external indicator that the BC66 module is currently in deep sleep mode. 

As such, whenever Quectel BC66 returns from a deep sleep, its VDD_EXT signal wakes up the host MCU and the embedded IoT application program (firmware) to take over the control of the IoT device – according to use case requirements. For this software, reconnection to the registered network and request for pending downlink messages will be the first things to do. Waking up the sensor chip and kicking off a measurement cycle also needs to be done within each single activity period (see Figure 2). When finished, the MCU will pass IoT payload data to the BC66 module, request for data conversion into the selected protocol format (e.g., UDP or MQTT) and initiate data transmission via the cellular network. Finally, the MCU will ask the BC66 module to initiate the next PSM period, and the IoT device re-enters the specified infinite loop of activity and PSM cycles

In the end, the power consumption of each component during all active and idle periods will aggregate to the total power consumption of the IoT device. In our case, an 8-bit MCU and the SHT4x sensor with low-power idle modes consuming less than 1 µA have been selected. For our calculation, we assume that we will have an activity slot every 12 hours (i.e., IoT data will be reported twice a day) which takes 5 seconds each. During these active periods, device power consumption will be dominated by the RF power required to re-connect and transmit the IoT data package to the network.

For our use case, selected components, and configured parameters for short activity periods and long PSM periods are leading to the total power consumption of ca. 275mAh per year (refer to Ref. 5 for a more detailed explanation and a spreadsheet of how these numbers are calculated). With this approach, a fixed AA-sized 3000mAh Lithium battery will provide an amazing zero-touch product lifetime of 10,9 years – which is a good value proposition for a remote monitoring IoT solution which can be used everywhere.


Are you interested in more information about Quectel, Sensirion products or technical advice on product selection?
Or do you have another question or request? Fill in the following form, we will be happy to help you.

* Data marked with an asterisk (*) are required.

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Related articles

Main products


BC660K-GLAA-I03-SNASA QUECTEL  
BC660K-GLAA-I03-SNASA

NB-IoT Module 17,6x15,7mm

GSM / UMTS / LTE / 5G modules

Ord. No.: 343186
Manufacturer: QUECTEL
in stock 418 pcs
1 pcs+
5 pcs+
25 pcs+
50 pcs+
100 pcs+
250 pcs+
8,13 €
7,90 €
7,68 €
7,45 €
7,22 €
7,00 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

2JF0624P-010/137-UFL 2J  
2JF0624P-010/137-UFL

Cellular Antenna LTE Microcoax 1,37mm 0,1m U.FL

Antennas

Ord. No.: 264410
Manufacturer: 2J
in stock 26 pcs
1 pcs+
2 pcs+
20 pcs+
80 pcs+
5,01 €
4,85 €
4,14 €
3,79 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

2JF0683P-018MC137B-UFL 2J  
2JF0683P-018MC137B-UFL

5G Flexible Antenna Microcoax 1,37mm 18cm Black, U.FL

Antennas

Ord. No.: 342732
Manufacturer: 2J
in stock 19 pcs
(04/19/2024: 200 pcs)
1 pcs+
5 pcs+
20 pcs+
120 pcs+
3,57 €
3,18 €
2,94 €
2,65 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

SHT 41_ BOB VARIOUS  
SHT 41_ BOB

Break out Board with SHT41-AD1B-R2 ±1.8% RH ±0,2°C

Humidity Sensors

Ord. No.: 373380
Manufacturer: VARIOUS
in stock 24 pcs
1 pcs+
4,06 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

SHT41-AD1B-R2 SENSIRION  
SHT41-AD1B-R2

Humidity & Temperature Sensor I2C DFN4

Humidity Sensors

Ord. No.: 358574
Manufacturer: SENSIRION
in stock 2300 pcs
1 pcs+
10 pcs+
50 pcs+
100 pcs+
1,79 €
1,50 €
1,46 €
1,41 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer

More about cookies
More about personal data processing

Necessary Only selected Accept all cookies