The rugged 10,1” tablet is a perfect tool for industrial field service and maintenance or mobile HMI. It offers industry standard interfaces and connectors, hot-swappable battery and optional barcode reader, as well as the fact that it has been designed to allow customization.
This is an archive article published 23.05.2019. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
RTC-1010 series design shares many features with AAEON flagship, the RTC-1200 series. It is IP65 compliant, can withstand drops from a height of 122cm, meets MIL-STD-810G standards, allows customization and has an operating temperature range of -20°C to 50°C.
Tablet uses standard D-SUB9 connector for RS232/422/485 so you don’t need any special cables. USB interfaces uses type A connector, which is more rugged as micro USB used by consumer tablets, and one type C connector.
The tablet uses a standard DSUB-9 connector for RS232/422/485 so you do not need any special cable. RS232 is often used in the industry to configure devices. RS-485 is physical layer for fieldbuses such as BACnet, Bit-Bus, EIB, LonWorks, ModBus, P-Net or ProfiBus. USB interfaces use Type A connectors that are mechanically more durable than microUSBs used in non-industrial tablets, and one type C connector. Of course, the tablet also has an RJ-45 Ethernet connector.
You can work with the touchscreen wearing thin working gloves such as Hyflex. It has built-in speaker but no microphone. For calling, you can use a Bluetooth/USB headset or headset with the built-in mic via the audio jack.
● Display: 10.1“ 1280x800, brightness 300nits, projected capacitive multi-touch 10 points, Gorilla Glass version 3, H6 hardness. ● System: Intel® Pentium® N4200 1.1GHz Quad core up to 2.5GHz, DDR3L RAM 4GB, eMMC 64GB. ● Wireless communication: Wi-Fi 802.11 b/g/n, Bluetooth v4.1. ● Navigation: RTC-1010-R1xxx versions support GPS + GLONASS, RTC-1010R0xxx versions support GPS + BeiDou ● Interfaces: micro-HDMI port, SIM card slot, micro-SD card slot, audio jack, USB 3.0 Type A, USB 3.0 Type-C, USB 2.0 x 2, RS-232/422/485 COM port, 10/100/1000 Base-T and DC-in jack. ● Camera: 2MPixels front camera, 8MPixels rear camera with flash. ● Expansion slots: inside mini-card slot, mini-card slot, docking connector (USB 2.0) ● Sensors: G-sensor, E-compass, Gyro-sensor, Light-sensor. ● RFID: NFC reader (NXP PB5441A2ET) on the front side. ● Batteries: Built in 7.4V, 1530mAh battery, hot-swappable: 14.4V, 2270mAh battery. ● OS: Windows® 10 IoT Enterprise.
● Up to 512GB mSATA 3 SSD via inside mini-card slot ● GPS, Galileo without extra cost, MOQ=50pcs ● Smart card reader (without IP protection) ● Android 8.1
All accessories are assembled during production and can’t be installed by customers.
Products are available upon request. If you need more information or you are interested in other AAEON products, please contact us at firstname.lastname@example.org
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Date of publishing 23.05.2019. When you issue article on your website, please give its source: https://www.soselectronic.com/articles/aaeon/rtc-1010-the-optimal-combination-of-performance-durability-and-interfaces-2269