Founded in 1991
7 European Locations
Customers from 100+ countries
Support from development to manufacturing
APACER

Slim 1,8“ and 2,5“ SSD APACER for mobile devices into a bad weather

Also this way can be described industrial SSD of a new generation APACER SAFD 18S3 and SAFD 25M3 with capacities up to 16 GB, designed with emphasis for ultra slim design and a high reliability in mobile devices.

This is an archive article published 14.07.2011. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
Equipped with a highly reliable SLC Flash memory, able to work at industrial temperature range and to withstand a 50G shock in operation, are some of many benefits, which designate these discs into harsh conditions. Disc SAFD 25M3 is a half-size of a standard 2,5“ SATA HDD and SAFD 18S3 is a miniature disc compliant with JEDEC MO-297 standard.
Similarly like compact flash cards CFC 5 a CFC 5 Plus, also these SATA discs are designed to meet stringent demands for stored data reliability. APACER SAFD 18S3 and SAFD 25M3 are compliant with specifications ATA 2.5, resp. 2.6 and SATAII, 3.0 Gbps. Used SLC chip (single level cell), hardware ECC function (error checking and correction), intelligent power failure recovery and S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology), and bad blocks management, contribute to the disks reliability. High sustained read/ write speed up to 115/90 MB/sec, burst 300MB/sec, stays remained even over time also thanks to a TRIM command support and a compatibility with Windows 7 optimizing technology.
Among well known advantages of SSDs in comparison to magnetic HDDs belong a much better reliability, immediate start, insensitivity to magnetic field and resistance to shocks and vibrations. For further enhancement of robustness and resistance to vibrations, have both types screw holes to secure the SSD to the motherboard. Thanks to these features are serial ATA Flash discs APACER SAFD 18S3 and 25M3 designated for utilization in industrial tablet PCs and rugged mobile devices.

For further informations about prices and delivery terms please contact us at info@soselectronic.com.

Advantages/ Features:

  • super small form factor industrial SSD discs
  • SLC (single level cell) chip
  • data transfer up to PIO-4, Multi-Word DMA-2, Ultra DMA-5
  • sequential read/write - 115/90 MB/sec, burst 300MB/sec
  • hardware ECC function and advanced wear leveling and block management
  • available also with a specified temperature -40 to +85 °C
  • 7 pin SATA signal connector and 15 pin SATA power connector
  • available with capacities 4, 8 and 16 GB

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Cookies help us provide services. By using our services you consent to the use of cookies.
OK More info