Ergonomic enclosures of the 1553 series with a non-slipping surface found their place on a market very quickly. Precise construction with brass bushings, stainless steel screws included, easy PCB placing on standoffs and other details make this series of enclosures universal for practically any “mobile” applications.
Despite very well fitting parts of an enclosure minimizing a possibility of a dust ingress into enclosure, there certainly are applications with a higher risk of water and dust penetration. For these cases the new “W” version is suitable, i.e. 1553W with integrated sealing and a whole construction designed so as to meet IP65 requirements. Fixing positions for screws are located outside the gasket ensuring sealing integrity.
Hammond 1553W series is available in “B”, “C” and “D” sizes, i.e. 1553WB (117x79x25mm), 1553WC (117x79x32mm) and 1553WD (147x90x25mm). All sizes are further available in two colours – whit-grey and black (GY/BK).
Further details can be found in datasheets at particular types below this article.
Water and dust resistant hand-held enclosures – IP65
Integrated silicone rubber sealing
Three sizes in two colours
Soft side grips in RAL7012 grey colour
Moulded from flame-retardant ABS UL94-V0
Black stainless-steel screws included
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Date of publishing 21.07.2016 When you issue article on your website, please give its source: http://www.soselectronic.com/articles/hammond/hammond-with-hammond-1553w-enclosures-the-rain-won-t-surprise-you-1711