Great development software and easy-to-use ESP32-based platform are key features for the rapid development of your HMI IoT products with the new generation displays from 4D Systems. Get started immediately with the convenient starter kit.
Many graphic OLED displays from Winstar can be purchased with an application-specific PCB, which significantly simplifies the development of the device and the assembly of the display in the final application. Check out the latest Winstar products in our product offer.
If you are looking for an IPS TFT display suitable for your embedded PC or any other device with an HDMI or LVDS interface, we have the solution for you. TFT displays also with custom cables from DigiWise. They are part of our stock offer.
We have expanded our stock range by 2 popular Winstar character OLED displays, which you may find interesting also for your application. Even if you have only minimal experience with displays and use a less powerful microcontroller. (reading for 3 minutes)
The family of displays with the Pixxi 28 or Pixxi 44 graphics processor comes with round, square and widescreen displays and several graphics functions and a powerful free graphics development environment.
Designers and manufacturers are often required to design displays for their new devices or upgrade their existing devices by replacing physical buttons with graphical touch screens. This is, however, often easier said than done.
Electronic Assembly's new series of uniTFTs from 2", 2.8", 3.5" to 4.3" offers extremely short development of highly sophisticated HMIs. All sizes are available from our warehouse.
Designers often underestimate the demands on graphic performance and complexity of display design, which then leads to insufficient performance. Even though we already wrote about programmable uniTFTs displays, but we were so impressed by these small displays that we asked the manufacturer for an interactive webinar.
The new gen4-FT81x display modules from 4D Systems represent a ready-made solution based on graphics chips from Bridgetek. The main advantages include easy and intuitive programming, powerful SW IDE, many useful functions and three display sizes.
Choosing a display is a crucial thing. If you consider 5 important display parameters in your selection and take the basic advantages and disadvantages of both technologies into account, you can easily choose the most suitable display for your application.
We played with Sensirion and Bridgetek development kits, which we connected to the air quality measurement kit. However, the Arduino module can do much more, see for yourself.
Building on the success of the first two generations of FT8xx touch display controllers, Bridgetek introduced two new chips, BT815 and BT816. The possibility to connect up to 256MB of external FLASH is not the only enhancement that EVE3 offers.
