Lantronix xPico module is a highly flexible network connectivity solution for serial interface devices.
This is an archive article published 22.04.2013. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
Lantronix xPico is thanks to its miniature dimensions (smaller than a usual SD card) suitable even for designs typically intended for chip solutions.
The key difference with the xPico is that there is virtually no need to write a single line of code (FW), resulting to a much lower development cost and faster time to market. The xPico is based on the industry-proven Lantronix device server with a relatively very easy to integration to a target device. Built-in web-manager enables a quick and comfortable configuration.
xPico is suitable for all devices, where it is physically necessary or convenient to use a module with miniature dimensions and a low profile. With the xPico you´re free to place an RJ45 connector according to your demands. That´s why it is possible to utilize the xPico even in space critical designs, where for example the Lantronix XPort wouldn´t suit.
Detailed information will provide you the xPico user guide and the xPico integration guide. For a development support also the xPico development kit is available.
In case of interest, please contact us at firstname.lastname@example.org.
Advantages / Features:
miniature embedded device server
extremely compact network solution for any serial interface device
eliminates the need of a costly SW and FW development
dimensions only 24 x 16.5 x 7.4mm
up to 921 kbps serial data rate
256 kB SRAM/ 512 kB Flash
256-bit AES encryption
extended temperature range -40 to +85°C
3,3V interface (5V tolerant)
built-in web server with a 384 kB memory
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Date of publishing 22.04.2013 When you issue article on your website, please give its source: http://www.soselectronic.com/articles/lantronix/lantronix-do-you-need-a-chip-sized-ethernet-y-1298