How does the workshop work?
- Place: 2N TELEKOMUNIKACE a.s., Modřanská 621/72, 143 00, Prague 4-Modřany, Czech Republic map...
- Date: 16.10.2012 (9:00 - 16:00) We are sorry but capacity of workshop in Prague has been filled already. If you are interested in this workshop, please contact us and book ypur place in another Pizza Workshop now!
- Place: Technopol Servis a.s., Kutlíková 17, 852 50 Bratislava, Slovakia map...
- Date: 17.10.2012 (9:00 - 16:00)
- Place: Debrecen University, Technical Faculty, Debrecen, Ótemető u. 2-4., Hungary
map...
(only 1,5 hour by car from Oradea, Romania) - Date: 18.10.2012 (9:00 - 16:00)
This is an archive article published 10/08/2012. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.
Goal:
- Learning to program and using the:
M10EVB KIT
M95TE-A
Agenda:
- Introduction of Quectel and overview of its products
- EVB introduction and operation (Including some components and interface introduction, and the EVB operation such as how to send
a AT command with QCOM etc.) - AT command operation (Brief AT command introduction, TCPIP, SMS, FTP, HTTP, Others, MMS etc.)
- Hardware Design (Power supply, UART port, SIM interface, RF interface, Switch on/off the module, Low power consumption application , Audio)
- GPS modules - L70, L50, L16
- Discussion
Prerequisites:
- SIM card with internet
- Notebook
- with USB port
• Referenced document to be download for workshop:
M10EVB KIT and M95TE-A are provided by SOS electronic during the workshop.
Workshop will be held in English.
Trainer: Edward Huang, Quectel
Trainer: Edward Huang, Quectel
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.