Italy
€ EUR
Prices without VAT

FT2232H and FT4232H – FTDI´s 5th generation of USB devices

The FTDI FT2232H Mini-Module and FT4232H Mini-Module are miniature USB 2.0 high-speed evaluation modules that support the new FT2232H and FT4232H USB 2.0 high-speed devices that can be configured in a variety of industry standard serial or parallel interfaces such as UART or FIFO. The module PCB measures just 36mm (L) x 30mm (W) x 12mm (H including connector pins). The Multi-Protocol Synchronous Serial Engines (MPSSE) are capable of speeds up to 30Mbits/s and provide flexible interface configurations. The entire USB protocol is on a chip with integrated LDO regulator and PPL. Each FTDI Mini-Module provides access to all required signals through two 26 way (2 rows, 0.1" pitch) male headers measuring 32.9mm x 5.08mm. The pin length is 6mm. These products allow customers to quickly evaluate the FT2232H and FT4232H device and drivers prior to commencing their own design.
This is an archive article published 05/21/2009. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.

FT2232H Mini ModuleB

  • Dual High Speed USB to Multipurpose UART/FIFO/MPSSE IC
  • Provides two independent configurable interfaces
  • 4K bytes TX and Rx data buffer per interface
  • Extended temperature range (-40ºC to +85ºC)


The FT2232H Mini Module is a USB-to-serial/FIFO development module in the FTDI product range which utilizes the FT2232H USB Hi-Speed two-port bridge chip which handles all the USB signaling and protocols. It is ideal for development purposes to quickly prove functionality of adding USB to a target design.

The FT2232H on the Mini Module is FTDI’s 5th generation of USB devices. The FT2232H is a USB 2.0 Hi-Speed (480Mb/s) to UART/MPSSE IC. The device features two interfaces that can be configured for asynchronous or synchronous serial or parallel FIFO interfaces. The two channels can also be independently configured to use an MPSSE engine. This allows the two ports of the FT2232H to operate independently as UART/Bit-Bang ports or MPSSE engines used to emulate JTAG, SPI, I2C, Bit-bang or other synchronous serial modes.

The FT2232H Mini Module connects the signals of the FT2232H IC to two 26-pin dual-row headers which allow easy connection PCB header sockets and ribbon cables.

FT4232H Mini-Module

  • Quad High Speed USB to Multipurpose UART/MPSSE IC
  • Provides four channels
  • 2K bytes TX and Rx data buffer
  • Extended temperature range (-40ºC to +85ºC)

The FT4232H Mini Module is a USB-serial/MPSSE development module in the FTDI product range which utilizes the FT4232H USB Hi-Speed four-port bridge chip which handles all the USB signaling and protocols. It is ideal for development purposes to quickly prove functionality of adding USB to a target design.

The FT4232H on the Mini Module is FTDI’s 5th generation of USB devices. The FT4232H is a USB 2.0 Hi-Speed (480Mb/s) to UART/MPSSE IC. The device features four interfaces that can be configured for asynchronous or synchronous serial or parallel FIFO interfaces. Two of these have an option to independently configure an MPSSE engine. This allows the FT4232H to operate as two UART/Bit-Bang ports plus two MPSSE engines used to emulate JTAG, SPI, I2C, Bit-bang or other synchronous serial modes.

The FT4232H Mini Module connects the signals of the FT4232H IC to two 26-pin dual-row headers which allow easy connection PCB header sockets and ribbon cables.

Application Areas

  • Single chip USB to four channels UART (RS232,RS422 or RS485) or Bit-Bang interfaces.
  • Single chip USB to 2 JTAG channels plus 2 UARTs.
  • Single chip USB to 1 JTAG channel plus 3 UARTs.
  • Single chip USB to 1 SPI channel plus 3 UARTs.
  • Single chip USB to 2 SPI channels plus 2 UARTs.
  • Single chip USB to 2 Bit-Bang channels plus 2 UARTs.
  • Single chip USB to 1 SPI channel, plus 1 JTAG channel plus 2 UARTs.
  • Single chip USB to 2 I2C channels plus 2 UARTs.
  • Numerous combinations of 4 channels.
  • Upgrading Legacy Peripheral Designs to USB.
  • Field Upgradable USB Products.
  • Galvanic Isolated Products with USB Interface.
  • Cellular and cordless phone USB data transfer cables and interfaces.
  • Interfacing MCU / PLD / FPGA based designs to USB.
  • USB Audio and Low Bandwidth Video data transfer.
  • PDA to USB data transfer.
  • USB Smart Card Readers.
  • USB Instrumentation.
  • USB Industrial Control.
  • USB MP3 Player Interface.
  • USB FLASH Card Reader/Writers.
  • Set Top Box PC - USB interface.
  • USB Digital Camera Interface.
  • USB Bar Code Readers.
Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer
Necessary Only selected Accept all cookies
Change the settings
Country
Select the country you are located in to receive relevant information and services tailored to your region.
Choose a language
Select your preferred language for displaying website content and communicating with our support.
Currency
Select the currency in which you want to see product prices. This way, we ensure you see current prices tailored to your needs.
Show prices with VAT
Select whether you want to display prices with or without VAT to have a better overview of costs.
Prices without VAT Prices incl. VAT