Italy
€ EUR
Prices without VAT

How to use an industrial IR thermometer to measure body temperature?

Take heart and don’t get discouraged by falsely measured data. With the help of a very simple calibration of an industrial thermometer, you can also reliably measure the body temperature of the human body.
This is an archive article published 06/03/2020. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.

Industrial infrared thermometers (spotmeters) and similarly infrared cameras are calibrated for a wide range of measured and operating temperatures. They usually have a resolution of 0.1°C, but their basic (in-) accuracy is usually ± 1.5 to 2.5°C.

Although industrial infrared thermometers are much more advanced instruments than conventional medical thermometers, compared to them, they have a significantly higher basic inaccuracy. Medical thermometers are more accurate because they are usually calibrated for a very narrow temperature range (approx. 34-44°C). However, this does not exclude the possibility of using an industrial thermometer for this purpose; we just need to find out what is the basic deviation of the device.

The solution for measuring with an industrial IR thermometer is a proportional, alias relative measurement. In other words, we need to find out what the deviation of our industrial thermometer is in comparison with the temperature normal.

If we measure a healthy person’s temperature and get a certain value, e.g. 34°C, it is practically certain that if we measure 36°C for someone else, then this person has an increased temperature, i.e. their forehead is warmer by 2°C than other people measured.

It is good to repeat the measurement several times at this “calibration”. This way we check whether the thermometer still shows the same result (or only a small deviation) even after several measurements of an object with a constant temperature. For example, the wall of the office in the interior, which usually has a very stable temperature within a few minutes, will serve us well for the verification.

The emissivity of the human body is about 0.98, so if the thermometer allows it, we recommend setting it on the device in this way.

Another important factor that we should not forget is that the human forehead has a real body temperature only rarely. Even if we measure with an accurate thermometer with a deviation of, for example, ± 0.1°C, it seldom shows a temperature of 36-36.5°C, as if we would get by measuring in the armpit. This is because the forehead temperature is quite strongly dependent on the ambient temperature and, especially in colder and windier weather, it can be significantly lower than the actual body temperature.

Field of view - the angle of view of medical thermometers is usually wider than that of industrial thermometers, but in practice, this is not a problem at all. Conventional medical thermometers are designed to measure from a distance of 1 to 5cm and often do not even have optics, so they read with a ratio of 1:1 to 1:3.

Industrial IR thermometers usually feature 1:8 to 1:20 optics and thus measure a smaller face area, at the same measuring distance. A narrower sensing angle of industrial thermometers can, therefore, be an advantage, as it allows measuring from a greater distance, e.g. 20cm.

In conclusion, we can say that with the help of the mentioned simple "calibration" we can get reliable results of measuring body temperature with industrial IR thermometers. Of course, measuring body temperature with a medical thermometer remains the simplest possible way to measure the temperature of the human body. The resolution of both types of thermometers is usually the same: 0.1°C.

If you have any questions about the measurement as such or about specific industrial IR thermometers or cameras, we will be happy to advise you at sales@soselectronic.com

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Main products


YHKY-2000 VARIOUS  
YHKY-2000

Infrared Thermometer +34...+43°C, Accuracy±0,2°C 1...5cm, 2xAA not included

Infrared Thermometers

Ord. No.: 336965
Manufacturer: VARIOUS
No longer available

IR 800-20C VOLTCRAFT  
IR 800-20C

Infrared Thermometer 20:1 -40...+800°C

Infrared Thermometers

Ord. No.: 322921
Manufacturer: VOLTCRAFT
in stock 2 pcs
1 pcs+
50,40 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

IRF 260-10S VOLTCRAFT  
IRF 260-10S

IR thermometer 10:1 -50...+260 °C

Infrared Thermometers

Ord. No.: 205327
Manufacturer: VOLTCRAFT
1 pcs+
48,70 €
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

Additional products

TG297 (87504-0404) TELEDYNE FLIR
TELEDYNE FLIR

Ord.number: 323288

in stock 2 pcs

TG297 (87504-0404)

Thermal Imaging Cameras

Thermal Camera LCD 2.4”, -25°C..+1030°C, 160x120pix

1 pcs+ 1 070,00 €

  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
TG267 (87502-0202) TELEDYNE FLIR
TELEDYNE FLIR

Ord.number: 323278

in stock 4 pcs

TG267 (87502-0202)

Thermal Imaging Cameras

Thermal Camera LCD 2.4”, -25°C..+380°C, 160x120pix

1 pcs+ 448,00 €

  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer
Necessary Only selected Accept all cookies
Change the settings
Country
Select the country you are located in to receive relevant information and services tailored to your region.
Choose a language
Select your preferred language for displaying website content and communicating with our support.
Currency
Select the currency in which you want to see product prices. This way, we ensure you see current prices tailored to your needs.
Show prices with VAT
Select whether you want to display prices with or without VAT to have a better overview of costs.
Prices without VAT Prices incl. VAT