Articles
Are you looking for a solution for your heating control?
The Rondostat HR20 - an electronic radiator controller for automatic indoor-temperature control.
Hirschmann new service case
Electro Installation and Electronic For all tasks of industrial installation, services, utilities management, training, development, service, education and more...
A hot look for a cool logger
A very interesting product has launched as the EA SYLOG-USB-1, the world's first battery powered temperature data logger with a direct USB interface. Using the Windows compatible software supplied, the EA SYLOG-USB-1 can be configured to measure temperatures from -25 to +80°C (-13 to +176 F). User selectable logging intervals from 10 seconds to 12 hours and a memory capacity of more than 16,000 readings make this data logger ideal for many temperature dependant industrial and consumer applications. The logger's housing provides an IP67 rated waterproof seal enabling the product to be used in harsh environments. The EA SYLOG-USB-1 has user programmable high and low temperature alarms, which are shown locally by a bright red LED and can be set to remain active once an alarm level has been triggered. Additional green and amber LEDs inform the user of other logger conditions, including memory capacity and battery status. All readings are stored in non-volatile memory ensuring important data is never lost. Simply plug into a USB socket on a PC for instant download and graphing of logged data. Once the data has been downloaded, the logger can be instantly reconfigured to begin the next application. The EA SYLOG-USB-1 and some other data loggers in the same style for humidity, carbon monoxide, voltage and loop current 4~20mA are available immediately from ELECTRONIC ASSEMBLY.
DOG Module - new display series
This new display series was specially developed for low-power hand-held applications - it is possible to operate a standard display at 3.3V. 5V operation is for the character displays also possible. The optionally available LED backlighting can also be run with 3.3V or 5V depending on the connections.
New Hammond plastic enclosures
Hammond company, manufacturer of the electronic enclosures, recently introduced new series of budget-priced plastic enclosures.
Introducing the Vinculum VNC1L USB Host Controller
Vinculum is the brand name for the new family of USB Host Controller ICs devices from FTDI.
Easy home networking!
What is HomePlug? HomePlug adapters let you connect desktop or notebook PC, printers, modems and routers to your household power grid, transforming it into a full-featured data network.
VDRIVE 2 - add an USB Flash disk interface into your application
In addition to the already well-known VNC1L chip we presented VDRIVE1 module and know we would like to point to the another module in this range, known as VDRIVE2, which will help with developing or extending the functionality of your existing applications - such as using the memory with still popular USB 'key'.
Well known FT245 ICs for even better prices!
The FT245R series is one of the FTDI’s USB FIFO interface integrated circuit devices. And now we offer them even for better prices.
FT2232H and FT4232H – FTDI´s 5th generation of USB devices
The FTDI FT2232H Mini-Module and FT4232H Mini-Module are miniature USB 2.0 high-speed evaluation modules that support the new FT2232H and FT4232H USB 2.0 high-speed devices that can be configured in a variety of industry standard serial or parallel interfaces such as UART or FIFO. The module PCB measures just 36mm (L) x 30mm (W) x 12mm (H including connector pins). The Multi-Protocol Synchronous Serial Engines (MPSSE) are capable of speeds up to 30Mbits/s and provide flexible interface configurations. The entire USB protocol is on a chip with integrated LDO regulator and PPL. Each FTDI Mini-Module provides access to all required signals through two 26 way (2 rows, 0.1" pitch) male headers measuring 32.9mm x 5.08mm. The pin length is 6mm. These products allow customers to quickly evaluate the FT2232H and FT4232H device and drivers prior to commencing their own design.
VA 505 B – auto-scan pen meter with SMD identifier
VA505B recognizes resistance and capacitance of the different types of resistors, capacitors, diodes and helps to identifie low-cost components. Auto-scan pen meter VA505B brings wider measuring range as well as an autoranging and an automatic recognition of the measurement according to measured component. There is no more need to set the type of the component before measuring it. VA505B can be used also directly in the measured circuits in certain conditions.
Find out more about SAMWHA capacitors
Under the brand SAMWHA you will find Korean manufacturer of aluminum electrolytic capacitors, radial as well as SMD version for various types of applications.
