Be in plus with a graphic platform FTDI VM800P

„Plus“ version of new graphic modules FTDI with an EVE technology brings a big plus in a form of a compatibility with an Arduino platform.
This is an archive article published 05/16/2014. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.

Innovative graphic chips of the family EVE were introduced to you in our article: Is a display design difficult? Leave it to „Eve“! or also in the webinar in cooperation with the producer - FTDI. This time company FTDI comes with another significant step to make development easier - compatibility with an Arduino platform.
New versions of VM800 modules with the „P“ (Plus) suffix contain besides the graphic chip FT800 and a touch display (3,5/4,3 a 5,0“) a RISC procesor ATMEGA328P (16 MHz) with a precompiled Arduino „bootloader“ (from the supplied 4GB uSD card). It means, that applications can be developed in a free Arduino IDE environment and to use a huge amount of Arduino libraries. “Plus” version also contains a USB interface with the FT232R chip and a precise bezel (Black or Pearl). Also available are over 50 sample “EVE” applications including various gauges, keyboards and other usable in a target device. It can be said, that the Plus series is designed to be directly used not only for development, but also into a target device as a standalone graphic module (HMI) able to control even other peripheries and to communicate through a USB port. The module can be powered through a microUSB connector or from an external 5V adapter.

FTDI brings for a maximum versatility two possibilities of programming:
• through a so called HAL interface (Hardware Abstraction Layer ) enabling cooperation with various MCUs through an SPI interface as described in the Application Note 246 - VM800CB_SampleApp_Arduino_Introduction
• by using Arduino libraries as described in the document Application Note 318 - Arduino_Library_For_FT800_Series

Thanks to a close cooperation with the producer we already have first pieces in of VM800P modules in stock. Detailed information can be found in the VM800P datasheet.

In case of interest, please contact us at info@soselectronic.com.

Advantages / Features:

  • complete standalone graphic modules with a touch TFT LCD
  • compatibility with the Arduino IDE
  • significant simplification of development thanks to a compatibility with Arduino libraries
  • directly usable into a target device
  • including a precise bezel (pearl or black)
  • USB interface (FT232R)
  • uSD card

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Gain the VM800P module for free!

Competition with the following question has been published here:

Which graphic chip (family) is used in the VM800P modules?

The correct answer was: FT800
We have drawn the following winners:
Pavel Hynek [CZ]
Congratulations to winners. We´ll inform them by e-mail.
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer

More about cookies
More about personal data processing

Necessary Only selected Accept all cookies