It works really easily. Just approach your face to the thermometer at a distance of 5-10 cm, and it will automatically measure your body temperature. The measured data is displayed on a sufficiently large 3-digit LED display and the green LEDs on the sides light up. If the temperature is higher than 37.3°C, the thermometer emits an acoustic warning tone and the LED lights up red.
The K3 IR thermometer is supplied with a USB cable (USB A/micro USB) without a power adapter and can be powered by any 5V USB adapter with an output current of at least 1000 mA (e.g. from your unused older smartphone). You can also use a Li-Ion 18650 battery (not included) for power supply, which lasts up to 1 week being in operation, depending on the intensity of use, of course. If you insert a Li-Ion battery into the device, it will be charged via a USB cable and then you can use the thermometer on the battery.
You can place this thermometer on the wall but also a standard tripod, as it has a 6.3 mm thread on the bottom side. In case of a tripod solution, use a type that has only a small pad or a ball joint, as the USB connector is close to the tripod thread on the bottom of the device.
Non-contact IR thermometer K3 IR is a simple, fast, accurate and ready-to-use solution for temperature measurement at any entrances.
K3 IR non-contact IR thermometer, as well as the necessary accessories such as a Li-Ion battery and a 5V USB adapter, is in our standard stock range.
For more information, do not hesitate to contact us at email@example.com.
Key technical features:
- Test distance 5 - 10 cm
- Fever warning (above 37.3°C)
- Tripod mounting hole: 6.3 mm (1/4 inch)
- Surface mode measurement range 0 to 50°C.
- Standby operation: Approx. 1 week with 2500 mAh Li-Ion 18650 rechargeable battery
- Connections: Micro USB / USB 2.0