DIN rail switch-mode power supplies of the TCL series enable even a parallel operation of up to 5 pcs, thus easily solving problems with an insufficient power at a possible extension of your application. In the TracoPower TCL industrial power supplies series can be found 4 power lines - 24W, 60W, 120W and 240W, i.e. TCL024, TCL060, TCL120 and TCL240. They provide probably all, what we usually require from a good power source – reliability, high efficiency, good filtering resulting in a low ripple and noise, stable regulation even at variable load, shortcut and overload protection and other. TCL series features a very good price/ value ratio, while providing even further not very common benefits:
● possibility of a parallel operation, up to 5 units (except TCL240). For the most of applications it is naturally better to use 1 sufficiently rated power supply, but if you face the situation, that after adding new functional blocks has the power consumption of your device exceeded a limit of a given power supply, you can easily solve it by adding an another piece. It is mainly convenient if you already have certain types bought on your stock, thus immediately usable.
● wide input voltage range 85–264 VAC and a possibility to supply them even by a DC voltage in 85–375 VDC range (except TCL 240 series).
● adjustable output voltage. All models enable to continuously increase the output voltage up to + cca 15-25%.
● „Power OK“ signal with a possibility of resistive and inductive load, usable for switching of relay and similar (only TCL060 and TCL120 series, at 12/24/48V).
● screw detachable terminal blocks („plug-in“), or spring (screwless) terminal blocks, both enabling a very simple assembly in a distribution box.
All types are being delivered with a plastic adapter (holder) included, usable instead of a DIN-rail, for example for assembly to a panel, wall etc. TCL series has gained a lot of safety attests and complies with all common safety standards.
Also available is the TCL-REM240 module for a redundant operation of any 2 models from the TCL series, by means of decoupling. Another usage of the TCL-REM240 module is for decoupling of sensitive loads from a common main source.
Detailed information can be found in the Traco TCL datasheet and the TCL installation instructions.
Selected types are available directly from our stock, upon request we´re able to provide you any other type.
In case of interest even in non-stock types, please contact us at info@soselectronic.com.
Advantages / Features:
- industrial power supplies with a DIN-rail mounting
- universal input 85–264 VAC or 85–375 VDC (except TCL240)
- types with the 5, 12, 24 and 48V output voltage
- adjustable output voltage
- Power OK signal (only TCL060, TCL1202 at 12/24/48V)
- low output ripple and noise
- shortcut and overload protection
- possibility of a parallel operation (up to 5 pcs, except TCL240)
- operating temperature range -10 to +70°C
- international safety approvals
- compact plastic housing, UL 94V-0
- plastic adapter for panel / wall mounting included
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
