An insulated-gate bipolar transistor (IGBT) combines the efficiency of a MOSFET with the high-power handling of a bipolar transistor on a single chip. This makes it a top choice for switching applications, handling voltages from 600 V to 1 200 V, currents up to 150 A at 100 °C, and switching frequencies in the tens of kHz.
We have added FTDI USB 2.0 cables with speeds of 12 Mb/s and 480 Mb/s, providing a fast and easy way to connect devices with RS-232, RS-422, RS-485, UART, JTAG, SPI, or I2C slave interfaces to USB.
The STS4L temperature sensor is the latest addition to the STS4x family. It offers a 20% cost reduction compared to the STS40-AD1B sensor, with only a slight compromise in accuracy. Its low power consumption of 0.4 µA and wide supply voltage range of 1.08 to 3.6 V make it an ideal choice for battery-powered applications.
Sensirion's innovative STC31-C and STCC4 sensors measure thermal conductivity, calculating gas concentration based on that data. They are suitable for both indoor environments and controlled atmospheres.
Many devices use a two- or four-line dot matrix display and control buttons as the human-machine interface. The Bridgetek EVE controllers allow you to easily upgrade HMI to a color graphic TFT display with a touch screen. Check out a simple solution.
Sensirion offers three series of mass flow controllers. But which one to choose? We have compared the features and benefits of the latest Sensirion SFC5400, SFC5500 and SFC6000D series so that you can choose the best solution for your device.
We bring you a simple and clear overview on how to use open source SW development tools for Geehy APM32 microcontrollers in 64-bit Windows 10 operating system. Download the guideline on how to get started with Geehy APM32.
Geehy Semiconductor is a leading integrated circuit (IC) design specialist. It deals with the design, development, and production of high-quality and innovative IC solutions for a wide range of applications. The article about our new supplier provides useful information, including the offered assortment and applications for use.
Lidar by YDLIDAR measures the distance between itself and surrounding objects either in a plane or in space. The result of the measurement is a point cloud for the navigation of robotic vacuum cleaners, autonomously guided vehicles, service robots and the like. Choose a sensor to measure distance directly from our warehouse. (reading for 2 minutes)
Every generation of Sensirion humidity sensors is not only technically better, but also more affordable. This also applies to the fourth generation of sensors of the SHT4x series.
Sensors from Piher measure the rotation angle or linear position. The durable and robust design provides more than 50 million rotation cycles or virtually unlimited life for 2-piece rotary and linear sensors. They are made for harsh environments with the ingress protection of IP69K. (reading for 3 minutes)
We have included CH340G from WCH, which is a simpler, cheaper and, above all, a well-available alternative to FTDI USB/UART converters, into our stock offer.
