List of articles for category "Semiconductors"
(157)
RFID all inclusive – implement RFID quickly and simply
Compact RFID modules ID12 and ID20 can be marked by right as simple to use and reliable RFID components working with 125 kHz frequency.
LED diodes from the 230V mains on 2 ways
After a big response on the CL20M45 current limiting diode, we decided to add the type CL40M45 with a double nominal current. That´s why you´re free to choose from 2 types, and thus add a bigger variability to your LED applications.
Do you ventilate sufficiently? - with the CO2 monitor CDM4161a it can be found immediately
Carbon dioxide concentration in a closed room increases very quickly. With the Figaro CDM4161a calibrated module it can be checked simply and reliably.
LT3799 – create a LED driver with an active PFC
Isolated offline-flyback controller LT3799 enables to create a powerful LED driver with a minimum of external components, which is moreover compatible with common triac dimmers.
Protect health of people by Figaro sensors
Gases like hydrogen sulfide and ammonia are dangerous gases, which however can be easily detected.
FTDI is on the market already for 20 years!
USB solutions specialist Future Technology Devices International Limited - FTDI, celebrates in these days the 20-th anniversary of its founding.
New X-chip series will connect you to USB even easier and faster!
X-chip USB series from FTDI brings even higher functionality on a chip, including battery charging detection. Speeds-up development, saves space and decreases power consumption.
Simplify a development of USB devices by off-the-shelf files from FTDI
FTDI Expands Vinculum-II Precompiled Firmware & Source Code Offering, enabling a substantial shortening of development time.
DVi, HDMi, USB, ethernet ... they all need an ESD protection
Monolithic component DVIULC6-4SC6 for an ESD protection of high speed signals is a guarantee of a high reliability and a long lifetime of devices, especially in an industrial environment.
Simplify to yourself a development of applications with Sensirion pressure sensors
To be able to quickly test a suitability of a sensor for a given application will appreciate perhaps every designer. For this purpose company Sensirion brings an evaluation USB kit EK-P3.
ES1x diode - fast, superfast, ..., superfast efficient!
New superfast and at the same time efficient diodes Diotec ES1x series enable to further decrease power losses even in very quick circuits.
Change UART to USB in an existing device!
New DB9-USB connectors from FTDI enable to use a USB port in devices with UART interface without necessity of a PCB redesign.
