One of our suppliers of industrial storage solutions presented their latest SSD technology on Embedded World 2018.
Apacer will launch 3D NAND TLC FLASH based products during the year 2018. Is there any reason to worry? Absolutely not.
Sensirion’s SGP30 volatile organic compounds (VOC) and CO2eq multi-pixel sensor is the first of its kind in many aspects.
The LTC2944 is a battery monitor that measures charge, voltage, current and temperature to 1% accuracy, the essential parameters required to accurately assess battery state of charge (SoC)...
LT8641offers Silent Switcher architecture combined with spread spectrum switching frequency modulation, up to 3MHz switching frequency, synchronous rectification, 3 to 65V input voltage range, 3,5A output current and much more.
Apacer’s SDM5A-M and SM220-M242 SSD series provide an ideal balance of performance, capacity, reliability and cost.
The LTM2889 is CAN (controller area network) and CAN FD (flexible data rate) compliant microModule transceiver and isolator. It breaks potentially dangerous ground loops and allows reliable communication through CAN bus in harsh environment.
Sensirion digital differential pressure sensor SDP31 is based on the next generation of CMOSens® technology.
The LTC4380 is a micropower linear surge stopper that uses and external N-channel MOSFET and sense resistor to protect loads from high voltage transients and overcurrent conditions.
FTDI.FT-X series USB to serial bridges can be still reasonable option even for today.
LTM2881 allows RS485 or RS422 communication even in harsh environment.
Today more and more applications require high data rate transmission. LTE modules can be found not only e.g. in trucks but more and more vehicles are connected through LTE modules to the service centers and sends data for vehicle manufacturers to avoid damages and help new product development.