Hinweis
Sie durchsuchen derzeit die Website für Kunden aus Schweiz. Wir empfehlen, zur Vereinigte Staaten-Version der Seite zu wechseln, die für Ihre Region optimiert ist.
Verfügbare filter
Verfügbare filter
|
Hersteller
FTDI
|
FT245RN | QFN32 | SMD | - | 3,3...5,25 V | USB 2.0 Device 12 Mbit/s | USB Bridge | MSL 3 | Config. EEPROM | 8-bit FIFO |
|
Hersteller
FTDI
|
FT245RN | QFN32 | SMD | - | 3,3...5,25 V | USB 2.0 Device 12 Mbit/s | USB Bridge | MSL 3 | Config. EEPROM | 8-bit FIFO |
|
Hersteller
FTDI
|
FT260 | TSSOP28 | SMD | - | 3…5,5 V | USB 2.0 Device 12 Mbit/s | USB HID Bridge | MSL 3 | 12 Configurable GPIO, eFUSE config, supports I2C EEPROM | 232 UART (Full) / 422 UART / 485 UART, I2C Master |
|
Hersteller
FTDI
|
FT3xx | LQFP32 | SMD | - | 3...3,6 V | USB 2.0 Host 12 Mbit/s | USB Bridge, Android Open Accessory Mode | MSL 3 | - | 232 UART (RTS, CTS) / 422 UART / 485 UART, GPIO x7, I2C Master, SPI Master, SPI Slave |
|
Hersteller
FTDI
|
FT3xx | QFN32 | SMD | - | 3...3,6 V | USB 2.0 Host 12 Mbit/s | USB Bridge, Android Open Accessory Mode | MSL 3 | - | 232 UART (RTS, CTS) / 422 UART / 485 UART, GPIO x7, I2C Master, SPI Master, SPI Slave |
|
Hersteller
FTDI
|
FT3xx | LQFP32 | SMD | - | 3...3,6 V | USB 2.0 Host 12 Mbit/s | USB Bridge, Android Open Accessory Mode | MSL 3 | - | 232 UART (RTS, CTS) / 422 UART / 485 UART |
|
Hersteller
FTDI
|
FT3xx | QFN32 | SMD | - | 3...3,6 V | USB 2.0 Host 12 Mbit/s | USB Bridge, Android Open Accessory Mode | MSL 3 | - | 232 UART (RTS, CTS) / 422 UART / 485 UART |
|
Hersteller
FTDI
|
FT3xx | QFN32 | SMD | - | 3...3,6 V | USB 2.0 Host 12 Mbit/s | USB Bridge, Android Open Accessory Mode | MSL 3 | - | 232 UART (RTS, CTS) / 422 UART / 485 UART |
|
Hersteller
FTDI
|
FT4232 | QFN64 | SMD | - | n/a | n/a | n/a | MSL 3 | n/a | n/a |
|
Hersteller
FTDI
|
FT6xx | QFN76 | SMD | - | 3...3,6 V | USB 3.0 5 Gbit/s | USB Bridge | MSL 3 | n/a | FIFO 16-bit |
|
Hersteller
FTDI
|
VNC2 | QFN32 | SMD | - | 3...3,6 V | USB 2.0 Host/Device 12 Mbit/s x2 | Programmable USB Controller | MSL 3 | 3 GPIO | 232 UART (RTS, CTS) / 422 UART / 485 UART, SPI Slave |
|
Hersteller
FTDI
|
VNC2 | LQFP48 | SMD | - | 3...3,6 V | USB 2.0 Host/Device 12 Mbit/s x2 | Programmable USB Controller | MSL 3 | 7 GPIO, 3 PWM | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave |
|
Hersteller
FTDI
|
VNC2 | QFN48 | SMD | - | 3...3,6 V | USB 2.0 Host/Device 12 Mbit/s x2 | Programmable USB Controller | MSL 3 | 7 GPIO, 3 PWM | 232 UART (Full)c / 422 UART / 485 UART, SPI Master, SPI Slave |
|
Hersteller
WIZNET
|
W51xx | LQFP48 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
WIZNET
|
W75xx | TQFP64 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
SILICON LABORATORIES
|
CP | TQFP48 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
CIRRUS LOGIC
|
CS8900 | LQFP100 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
CIRRUS LOGIC
|
CS8900 | LQFP100 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
MICROCHIP
|
ENC | QFN28 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
MICROCHIP
|
ENC | SDIP28 | Through Hole | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
MICROCHIP
|
ENC | SSOP28 | SMD | - | n/a | n/a | n/a | n/a | n/a | n/a |
|
Hersteller
FTDI
|
FT-X | SSOP16 | SMD | - | 3…5,5 V | USB 2.0 Device 12 Mbit/s | USB Bridge | MSL 3 | 1 Configurable GPIO, Battery Charger Detection, config. EEPROM | 4-bit bi-directional SPI Slave, FT1248 Slave |
|
Hersteller
FTDI
|
FT2232 | LQFP48 | SMD | - | 4,35...5,25 V | USB 2.0 Device 480 Mbit/s | USB Bridge | MSL 3 | Interface for Microwire EEPROM | 232 UART (Full) / 422 UART / 485 UART x2, 245 FIFO x2, Async or Sync Bit Bang x2, CPU FIFO x2, I2C Master, JTAG, SPI Master |
|
Hersteller
FTDI
|
FT2232H | QFN56 | SMD | - | 3...3,6 V | USB 2.0 Device 480 Mbit/s | USB Bridge | MSL 3 | Interface for Microwire EEPROM | JTAG x2, 232 UART (Full) / 422 UART / 485 UART x2, 245 FIFO x2, Async or Sync Bit Bang x2, CPU FIFO x2, I2C Master x2, SPI Master x2 |
|
Hersteller
FTDI
|
FT2232H | QFN56 | SMD | - | 3...3,6 V | USB 2.0 Device 480 Mbit/s | USB Bridge | MSL 3 | Interface for Microwire EEPROM | JTAG x2, 232 UART (Full) / 422 UART / 485 UART x2, 245 FIFO x2, Async or Sync Bit Bang x2, CPU FIFO x2, I2C Master x2, SPI Master x2 |
