An insulated-gate bipolar transistor (IGBT) combines the efficiency of a MOSFET with the high-power handling of a bipolar transistor on a single chip. This makes it a top choice for switching applications, handling voltages from 600 V to 1 200 V, currents up to 150 A at 100 °C, and switching frequencies in the tens of kHz.
Linear voltage regulators still have a place in modern electronics. They are easy to use and require only two additional components, an input and an output capacitor.
3rd generation of Diotec's Schottky diodes use a smaller chip but simultaneously provide lower forward voltage Vf and lower reverse leakage current Ir comparing to previous generations.
We started to use the semiconductor diodes in the beginning of the last century. At present, rectifiers account for 27% of the power management market and will be with us for a very long time. More than 4,000 Diotec products can be found in our assortment.
If you have an application, where you work with kilovolts and you need a suitable diode, we have a solution for you.
If you have in your „drawer“ a universal 1000V diode in a miniature SOD123FL package, you have a solution for many circuits.
If you´re facing a decision which diode to use in your device or searching for a replacement, then this article is dedicated right for you.
After the recently introduced 1A diode SKL14, we introduce you the 3A type in the same miniature PowerSOD-123T package.
SKL14 can be used in switch-mode power supplies or as protection diodes and thanks their really miniature dimensions, they are ...
SMT components are still more used even in small production batches. That´s why in our portfolio, many components can be found in both versions - THT (through-hole technology) and also SMT.
After a big response on the CL20M45 current limiting diode, we decided to add the type CL40M45 with a double nominal current. That´s why you´re free to choose from 2 types, and thus add a bigger variability to your LED applications.
