The new gen4-FT81x display modules from 4D Systems represent a ready-made solution based on graphics chips from Bridgetek. The main advantages include easy and intuitive programming, powerful SW IDE, many useful functions and three display sizes.
FT81x graphics processors were introduced in our recent article.
For many years, we have been associating 4D Systems with their own graphics processors - especially Picaso and Diablo 16, which are still prospective and active.
However, for those who, for whatever reason, prefer Bridgetek's FT81x graphics processors, they bring an elegant solution with seven new 4.3", 5" and 7"gen4-FT81x modules.
Here you can find types with a resistive and capacitive touch panel, as well as with the demanded glass black frame (CLB - cover lens bezel), which also greatly simplifies assembly on the front panel simply by glueing into the hole.
The FT812 and FT813 chip-based modules allow you to create a powerful graphics application with minimal effort, which, in addition, has very low demands on the performance of the host processor. Bridgetek offers freely available development environment EVE Screen Designer (ESD).
Nowadays more than ever it is often more advantageous to use a ready-to-use module than to develop your own solution, especially for small and medium production series.
Please, find the new gen4-FT81x modules directly in our warehouse.
LCD TFT Screen with Resistive or Capacitive Touch.
Mono PWM audio output with separate amplifier enable
Onboard FTDI FT812 or FT843 Video Engine
64 voice polyphonic sound synthesizer
PWM dimming control for LCD backlight
JPEG and Motion JPEG decode
Single 5.0V supply
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Date of publishing 05.08.2020 When you issue article on your website, please give its source: http://www.soselectronic.com/articles/4d-systems/fast-graphics-with-ready-to-use-modules-based-on-ft81x-2471