The most popular red LED SuperFlux - L7676 CSEC-H

L-7676 serie is characterized by high luminous flux and wide viewing angle 70°, so they reach the same results as the large group of traditional LED diodes.

This is an archive article published 03/06/2009. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.

They are designed especially for automobile industry - reliable and rugged for high current operations and within the wide range of operating temperature. The case dissipates heat which is made on the chip, what allows to work with higher current values and minimizes light losses caused by self-heating at the same time. It can be used for mass assembling.

Colours available:

  • white
  • orange 621nm
  • red 625nm
  • hyper red 630nm
  • blue 470nm
  • yellow 588nm
  • green 525nm

There are 4 related and very important criteria when designing:

  • Optical aspect
    Optical aspect considers luminous intesity and LED´s emitting characteristics. Defines the need of additional elements as reflectors or lenses.
  • Mechanical aspect
    Defines construction´s dimensions considering requirements of other potencial optical elements, placing of a device and determinises application of suitable materials.
  • Thermal aspect
    Thermal draft defines amount of generated heat into ambient environment and must minimize the thermal resistance value. The construction should be able to assure minimum of selfheating. FLUX LED junction temperature must not get over 125°C. LED´s over selfheating causes unacceptable cut-down of luminous flux.
  • Electrical aspect
    Electric draft defines suitable current and must assure the most acceptable range of current values even if supply voltage and ambient temperature conditions are adverse. It must be electro-static discharge protective but also must be able to protect against pre-load and reducing voltage. LED´s reliability and life time decreases, when values of operating current are close to marginal values. Drive current between 10mA-30mA are recommended for long term performance.(operation at current below 10mA and more than 40mA is not recommended) whereby LED´s peak forward current is up to 150mA.

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Additional products


L-7676 CSEC KINGBRIGHT  
L-7676 CSEC

LED SuperFlux 7,6x7,6mm Orange 630nm 800mcd/20mA 70°

Standard LEDs

Ord. No.: 45256
Manufacturer: KINGBRIGHT
No longer available

L-7676 CSEC-E KINGBRIGHT  
L-7676 CSEC-E

LED SuperFlux 7,6x7,6mm Orange 621nm 800mcd/20mA 70°

Standard LEDs

Ord. No.: 12674
Manufacturer: KINGBRIGHT
No longer available

L-7676 CSEC-G KINGBRIGHT  
L-7676 CSEC-G

LED SuperFlux 7,6x7,6mm Orange 625nm 1200mcd/20mA 70°

Standard LEDs

Ord. No.: 45249
Manufacturer: KINGBRIGHT
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
Get Quote

L-7676 CSEC-H KINGBRIGHT  
L-7676 CSEC-H

LED SuperFlux 7,6x7,6mm Red/Orange 630nm 1800mcd/20mA 70°

Standard LEDs

Ord. No.: 45250
Manufacturer: KINGBRIGHT
in stock 74 pcs
5 pcs+
10 pcs+
75 pcs+
300 pcs+
1125 pcs+
0,3980 €
0,3470 €
0,3030 €
0,2810 €
0,2640 €
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

L-7676 CSURC KINGBRIGHT  
L-7676 CSURC

LED SuperFlux 7,6x7,6mm Red 628nm 700mcd/20mA 70°

Standard LEDs

Ord. No.: 45255
Manufacturer: KINGBRIGHT
No longer available

L-7676 CSURC-E KINGBRIGHT  
L-7676 CSURC-E

LED SuperFlux 7,6x7,6mm Red 630nm 600mcd/20mA 70°

Standard LEDs

Ord. No.: 12673
Manufacturer: KINGBRIGHT
No longer available

L-7676 CSYC KINGBRIGHT  
L-7676 CSYC

LED SuperFlux 7,6x7,6mm Yellow 588nm 400mcd/20mA 70°

Standard LEDs

Ord. No.: 45254
Manufacturer: KINGBRIGHT
No longer available

L-7676 CSYC-H KINGBRIGHT  
L-7676 CSYC-H

LED SuperFlux 7,6x7,6mm Yellow 589nm 600mcd/20mA 70°

Standard LEDs

Ord. No.: 47116
Manufacturer: KINGBRIGHT
No longer available
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer

More about cookies
More about personal data processing