Still more noise and vibrations and in extreme case even a total malfunction – this is a typical “end” of the fan after a long-time operation in a dusty or corrosive environment. In a usual dry and relatively clean environment, this scenario is not that dramatic and high-quality fans hold on to work for many years without problems. However, it can be also said, that common industrial environment is quite far from an ideal = clean one.
So, which fan to use?
The first good advice might be to use a quality fan, for example from companies Sunon or EBM-Papst. Company Sunon this time declares, that they shifted a level of lifetime and durability a step higher…
They “wrapped” all the motor into a „high-tech“ coating and incorporated a mechanism for automatic dust removal from a motor part.
And the result?
The fan works reliably even after a 60 minute ingress into water and into 1m depth. That´s only a small example demonstrating features of the new series with IP68 protection. New series carry GExxxx or GFxxxx marking and they´re available in three sizes - 80x80x25mm, 80x80x38mm and 90x90x25mm. All types are equipped by two ball bearings.
On stock we have types - GF80251B1-AE9 ( 80x25 12VDC 3,96W 101,9m3/h) and
GE80252B1-AE9 ( 80x25 24VDC 4,8W 101,9m3/h). Upon request we´re able to supply you also other types.
suitable for demanding industrial and outdoor environment
suitable for LED lights cooling
available in 3 sizes
3 versions for 12, 24 or 48 VDC
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Date of publishing 15.08.2017 When you issue article on your website, please give its source: http://www.soselectronic.com/articles/sunon/sunon-have-you-ever-seen-a-fan-resistant-to-dust-and-water-1736