As you already may suspect, it is a version intended for development, as the module doesn´t have to be soldered to a baseboard (by means of hot-air reflow). WizFi250-H can be beneficial not only for development, but also for usage in a target device, where it isn´t necessary to maintain the lowest possible construction height (baseboard + WiFi module). At the same time, this combination enables to assemble another components on a baseboard - below the WiFi module.
From the construction point of view, the WizFi250-H module is solved as a combination of the WizFi250 module with a small PCB with 2x double pin header (1.25mm). As for other features, the module is identical to the original module, that´s why they have the same datasheet WizFi250. WizFi250H can be used with the WizFi250-EVB development board. We bring you a comparison of both versions - with and without a pin header on attached pictures.
easily applicable Wi-Fi module - without soldering
serial UART and SPI interface
simple AT commands
IEEE 802.11 b/g/n
easy configuration through a built-in web server
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.
Date of publishing 08/26/2014. When you issue article on your website, please give its source: https://www.soselectronic.com/articles/wiznet/wiznet-wizfi250h-when-a-small-difference-can-help-significantly-1578
Price was valid on when ordering pcs. If you want to know the current price and availability, request a price offer.
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.