Many devices use a two- or four-line dot matrix display and control buttons as the human-machine interface. The Bridgetek EVE controllers allow you to easily upgrade HMI to a color graphic TFT display with a touch screen. Check out a simple solution.
Building on the success of the first two generations of FT8xx touch display controllers, Bridgetek introduced two new chips, BT815 and BT816. The possibility to connect up to 256MB of external FLASH is not the only enhancement that EVE3 offers.
EVE Screen Designer (ESD) 3.x is the most recent IDE SW for the development of graphic applications based on FT 90x and FT 81x chips.
Bridgetek’sCleO50 is simple to program, 5 inch Arduino display shield. It features 800x480 TFT display with 24-bit color depth and resistive touch screen. Same as the smaller CleO35 module, CleO50 is also CE and FCC certified.
Simply applicable graphic platform FTDI EVE simplifies development thanks to immediately-usable display modules with capacitive touch panels.
FTDI’s CleO35 is simple to program, 3.5 inch 320x480 TFT display with resistive touch panel that allows the construction of human machine interfaces (HMIs) with much higher performance than conventional Arduino display shields are able to deliver.
NerO is dealing with the fundamental drawbacks of the widely-used Arduino UNO R3 – inefficient onboard linear voltage regulator.
FT900 is 32bit RISC MCU developed for high speed, interface bridging tasks.
New graphic chips supporting capacitive touch screens - FT801 with the “EVE” technology from company FTDI bring a simple usage even for these perspective displays.
„Plus“ version of new graphic modules FTDI with an EVE technology brings a big plus in a form of a compatibility with an Arduino platform.
