Mini Fluxer will spread solder there, where you want

… and will prevent to spread there, where you don´t want to. Fluxes in pen Stannol series Mini Fluxer belong to the invaluable helpers of every electro-technician.

This is an archive article published 11/27/2014. Some information may no longer be up to date and in line with the current state. Please contact us in case of interest.

How could I work without a flux so far? That´s a probable question of probably everyone, who once tried action of a solder flux. In a common wire solder, there´s some amount of a flux, usually sufficient for one-time soldering of a given joint, if the components to be soldered are clean and oxides-free. However, we know well a case, when we use for example an older PCB, or an older component with slightly oxidized leads and suddenly it´s much harder to reach an acceptable joint. Similar situation happens at an exchange of a component or any service action, when a solder tends to oxidize on a surface and create various bad-looking creatures, which are quite far from a professional joint. Fortunately, there´s a flux here ...

In general, fluxes act in a manner, that a solder is as if „more movable“ after application. It is mainly thanks to the protection against oxidation, change of surface tension and other influences. As a result it means, that a solder spreads well on metals and joints with a given material (what we naturally want) and on the non-metal substances (PCB) is a solder repelled as if on an oily surface.

At an automated „all-surface“ soldering, fluxes are usually applied by wetting (foam) or by spraying. At development and servicing smaller packages are much more practical, for example in a form of a pen. Two novelties in our offer also belong to this category:

● Stannol MINI-FLUXER X32-10i – halogen free, activated „No clean“ flux, practically residue-free, vey tolerant to various working conditions. Minimum amount of electrically safe transparent residues with a high insulation resistance enables its usage even at visible places and at production of highly reliable devices, including solar panels. Significantly eliminates build-up of bridges, that´s why it´s very suitable even for manual soldering of fine-pitch components.

● Stannol MINI-FLUXER X33S-07i – highly activated halogen-free „No clean“, resin-free flux, with a corrosion inhibitor, very suitable even for copper surfaces – clean, passivated or lacquered by rosin-based agents. Excellent wetting even on poorly adherent surfaces. Excellent spreading manifests by for example trouble-free filling of vias by a solder.

Stainless steel spring mechanism of a pen enables simple and precise dosage and also a long pen lifetime. During application, it´s only necessary to softly press on the tip. Both fluxes are in our stable stock offer, available immediately or in a short leadtime (in case of a temporary out-of -stock status).
Detailed information will provide you the Stannol-X32-10i and Stannol-X33S-07i datasheets.

In case of interest in any Stannol products, please contact us at info@soselectronic.com.

Advantages/ Features:

  • 2 types of pen-type fluxes for soldering
  • invaluable helper for development and service
  • enables to reach first-class joints
  • precise mechanism with an stainless steel spring
  • quality „No clean“ fluxes with a minimum of residues

Do not miss these articles

Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.

Related product categories

Main products

MINI-FLUXER X32 10ml STANNOL
in stock 3 pcs
(06/03/2022: 1 pcs)
(We are checking the delivery date: 3 pcs)

MINI-FLUXER X32 10ml

Electro-Chemicals

NO-CLEAN flux pen 10ml F-SW33

Ord.number: 172393

STANNOL

1 pcs+ 7,65 €

2 pcs+ 7,33 €

5 pcs+ 6,51 €

10 pcs+ 6,23 €

ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
MINI-FLUXER X33S-07i 10ml STANNOL
in stock 0 pcs
(06/03/2022: 6 pcs)
(We are checking the delivery date: 1 pcs)

MINI-FLUXER X33S-07i 10ml

Electro-Chemicals

NO-CLEAN flux pen 10ml F-SW23

Ord.number: 172394

STANNOL

1 pcs+ 7,58 €

2 pcs+ 7,27 €

5 pcs+ 6,45 €

10 pcs+ 6,18 €

ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

Additional products


FMKANC 32-005 ERSA  
FMKANC 32-005

ERSA NO-CLEAN 5ml Flussmittel

Electro-Chemicals

Ord. No.: 39389
Manufacturer: ERSA
in stock 1 pcs
1 pcs+
2 pcs+
10 pcs+
31,00 €
30,20 €
28,00 €
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

952-D6 KESTER SOLDER  
952-D6

No Clean Flux Pen 12ml

Electro-Chemicals

Ord. No.: 126370
Manufacturer: KESTER SOLDER
No longer available

FLUX SK 10 = LOTLACK SK 10 200ml KONTAKT CHEMIE  
FLUX SK 10 = LOTLACK SK 10 200ml

Flux and a protective lacquer for PCB

Electro-Chemicals

Ord. No.: 33238
Manufacturer: KONTAKT CHEMIE
in stock 4 pcs
1 pcs+
3 pcs+
12 pcs+
7,30 €
7,02 €
6,59 €
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

ROSIN45G CYNEL  
ROSIN45G

Rosin soldering flux 45g (colophony)

Electro-Chemicals

Ord. No.: 165955
Manufacturer: CYNEL
in stock 460 pcs
3 pcs+
6 pcs+
20 pcs+
100 pcs+
400 pcs+
0,9820 €
0,9490 €
0,8610 €
0,7900 €
0,7400 €
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

TIP ACTIVATOR (T0051303199) WELLER  
TIP ACTIVATOR (T0051303199)

Tip Activator 22,5g

Electro-Chemicals

Ord. No.: 49470
Manufacturer: WELLER
in stock 18 pcs
1 pcs+
5 pcs+
10,60 €
10,40 €
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare

Tippy (272018) STANNOL  
Tippy (272018)

Soldering tip cleaner 220-450°C Sn97Cu3 powder w/ additives

Electro-Chemicals

Ord. No.: 175247
Manufacturer: STANNOL
in stock 18 pcs
1 pcs+
2 pcs+
10 pcs+
50 pcs+
7,13 €
6,63 €
6,07 €
5,63 €
ORDER:
  • ADD TO CART
  • Get Quote
  • Add to favorites
  • Add to watchdog
  • Add item to compare
Do you agree with cookies being stored?
Welcome to the SOS electronic website. Before you enter our online world, we would like to ask you to allow us to store cookies on your browser. Your consent will help us view the site without error, measure its performance, and track additional statistics. Apart from that, we can bring you an offer of our products and services, literally tailor-made. We also provide cookies to third parties. However, you are definitely safe with us.
The proper operation of the website
More stable technical control
Better marketing offer

More about cookies
More about personal data processing