KONTAKT 60 - in addition to corrosion-dissolving substances, the spray also contains a mixture of solvents that dissolve greasy and resinous residues. In practice, a few drops of it are sufficient for each pair of contacts. If the contacts are readily accessible, they can be carefully wiped, e.g. with cellulose, leather or cotton swabs. If such mechanical support cannot be provided, allow KONTAKT 60 to penetrate for about 10 to 15 minutes.
KONTAKT WL - is a residue-free cleaner designed to rinse off deposits after spraying KONTAKT 60. It washes away corrosion products, grease, and dirt.
KONTAKT 61 - spray for cleaning and especially treatment, intended for all types of electrical contacts. The solvent mix in KONTAKT 61 dissolves greasy dirt, oil, and resinous deposits, forms a sliding and lubricating film, displaces moisture and protects against corrosion and depreciation. It can be used as a contact cleaner too, except cases when contacts are corroded, in that case, we do recommend using KONTAKT 60. KONTAKT 61 is very suitable for the lubrication of sliding and plug-in contacts, increasing the wear hardness of contact surfaces.
However, for the best results, use all 3 agents in 3 steps to care for your contacts:
1. Apply KONTAKT 60 spray to the contact, which will dissolve oxides as well as hardly removable deposits.
2. Rinse the dissolved dirt and corrosion products with KONTAKT WL.
3. Finally, use KONTAKT 61 spray as a long-term protective film against corrosion and wear.
All 3 agents are safe for the vast majority of plastics commonly used in electronics.
Kontakt Chemie sprays are number one in the care of contacts. That's why we bring you this special set of the three products, KONTAKT TRIO (KONTAKT 60+61+WL), which is available at especially competitive price only while stocks last.
And if you need an efficient solution for dust, we recommend Dust Off 67, which is currently also at a discounted price.
Dust-Off is safe and non-flammable, with a strong gas flow (jet). It is one of the more expensive agents, but it is filled with a large amount of inert gas and the practical yield under real conditions is therefore very high.
Do not miss these articles
Do you like our articles? Do not miss any of them! You do not have to worry about anything, we will arrange delivery to you.