Only a 15 x 12 mm Quectel module with BLE 5.3 and a built-in Cortex-M3 processor running at 48 MHz supports interfaces such as I2C, UART, SWD, SPI, ADC, and I2S. It is ideal for sensors and automation requiring low-power wireless connectivity.
Great development software and easy-to-use ESP32-based platform are key features for the rapid development of your HMI IoT products with the new generation displays from 4D Systems. Get started immediately with the convenient starter kit.
The most compact ceramic patch antenna, 2JM3201C5F, for L1, L2, and L5 GNSS bands, is exceptionally reliable in determining position, including for autonomous vehicles and land surveying.
Quectel's high-performance GNSS module LC76G supports concurrent reception of GPS, GLONASS, BDS, Galileo, and QZSS. It is compatible with Quectel L76 and L76-LB modules, allowing for a seamless migration between them. You can find it in our warehouse assortment, readily available for your IoT projects.
The USR-M100 is an intelligent I/O gateway with comprehensive features, such as built-in support for I/O and RS 485/232/Ethernet interface. This modular RTU device from USR IoT, with its unique hardware and software design, is a cost-effective solution for industrial data collection applications.
The Wiznet W6100-EVB-Pico development platform is a combination of the very popular MCU RP2040, a fully integrated HW TCP/IP W6100 controller and Ethernet. It is a very convenient and ready-to-use solution for every IoT device.
If you are looking for an IPS TFT display suitable for your embedded PC or any other device with an HDMI or LVDS interface, we have the solution for you. TFT displays also with custom cables from DigiWise. They are part of our stock offer.
The Quectel EG800Q-EU 4G/LTE module is one of the first communication modules of the Cat. 1 categoryin thisfield, which is based on the Qualcomm QCX216 LTE IoT modem - a cost-optimized and energy-efficient global modem Cat. 1 bis.
Replace 9 antennas with one combined 2J6B86JBCFf-B16J from 2J Antennas. The combination of performance, durability, accuracy, and reliability was designed for critical communication. It will be the number 1 choice for the next generation of mobile services.
Display Visions enriches the market with several application boards for intelligent displays of the uniTFTs series. They will significantly facilitate your development and will also serve as a ready-made Wi-Fi HMI hardware solution.
With single-chip modules from Wiznet with Raspberry Pi RP2040, you can easily add ETH/WiFi to your device and enter the world of IoT with minimal cost and as fast as you need. (reading for 3 minutes)
Reliable wireless connectivity for the Internet of Things is crucial. Quectel offers plenty of Mini-PCIe solutions for embedded computers, routers and many other devices deployed in the field.
