Only a 15 x 12 mm Quectel module with BLE 5.3 and a built-in Cortex-M3 processor running at 48 MHz supports interfaces such as I2C, UART, SWD, SPI, ADC, and I2S. It is ideal for sensors and automation requiring low-power wireless connectivity.
The most compact ceramic patch antenna, 2JM3201C5F, for L1, L2, and L5 GNSS bands, is exceptionally reliable in determining position, including for autonomous vehicles and land surveying.
Quectel's high-performance GNSS module LC76G supports concurrent reception of GPS, GLONASS, BDS, Galileo, and QZSS. It is compatible with Quectel L76 and L76-LB modules, allowing for a seamless migration between them. You can find it in our warehouse assortment, readily available for your IoT projects.
Quectel Wireless Solutions has recently introduced the new Wi-Fi HaLow module, FGH100M, which provides data transmission over long distances with low energy consumption, but most importantly, with better penetration through walls and other obstacles. Don't miss out on the latest addition to our product range.
The Wiznet W6100-EVB-Pico development platform is a combination of the very popular MCU RP2040, a fully integrated HW TCP/IP W6100 controller and Ethernet. It is a very convenient and ready-to-use solution for every IoT device.
The Quectel EG800Q-EU 4G/LTE module is one of the first communication modules of the Cat. 1 categoryin thisfield, which is based on the Qualcomm QCX216 LTE IoT modem - a cost-optimized and energy-efficient global modem Cat. 1 bis.
Replace 9 antennas with one combined 2J6B86JBCFf-B16J from 2J Antennas. The combination of performance, durability, accuracy, and reliability was designed for critical communication. It will be the number 1 choice for the next generation of mobile services.
Global IoT module manufacturer Quectel issued PCN documents for several GNSS modules based on the Airoha AG3331 and MT3339 platforms at the end of August 2022. You can find an overview of alternative products in the article.
With single-chip modules from Wiznet with Raspberry Pi RP2040, you can easily add ETH/WiFi to your device and enter the world of IoT with minimal cost and as fast as you need. (reading for 3 minutes)
High performance, favorable price, and elegant design – these are the 5GNR antennas from 2J Antennas. They are designed using the latest innovations for advanced global communication technologies that work in the latest and also in most common networks. (reading for 2 minutes)
Featuring a concurrent multi-constellation GNSS receiver on dual GNSS bands, the Quectel LC79D can support L1 and L5 bands for GPS, Galileo and QZSS satellites, L1 band for GLONASS and BeiDou satellites, as well as L5 band for IRNSS satellite.
The 2J7402M/B is designed to be used in IoT applications. It is especially suitable for moving objects like cars, trucks, forklifts, etc. 2J7402 is manufactured in two versions: for mounting with a magnetic holder and mounting with a screw.